High humidity has an impact on your home’s condition as well as how you feel when you’re inside. Too much moisture may warp wood floors, remove wallpaper and paint, discolor walls and ceilings, and produce unpleasant odors. This kind of damage frequently necessitates expensive repairs.
In Texas, having too much humidity is undoubtedly a possibility. Condensation is one of the issues that this brings with it. Older homes often don’t experience this, but modern structures and residences do tend to retain more heat and moisture.
Controlling Humidity Is Important
Condensation on the glass is the first thing you’ll notice. When warm, wet air meets a chilly window, condensation occurs. Rapidly dropping air temperatures make it impossible for the air to retain water vapor.
Excess moisture can seep through ceilings and walls if your house lacks adequate natural ventilation or a functioning air conditioner. The humidity in your home may not be decreasing for one of two reasons.
The AC Unit Is Leaking
Condensation from air conditioners must be properly drained to prevent leaks and excess moisture in the air. A unit cannot lower humidity if the drain channels are blocked or the condensate pump is malfunctioning. The excess moisture that results might discolor carpets and walls.
These few things could help:
- Disconnect the power, and while the power is out, use a firm wire to clear the drain channels of any obstructions. a suitable bleach solution should be used to remove algae from the pump system.
- Verify any leaky pumps that may need to be replaced.
- check that the pump’s electrical connections are in good working order. It’s possible that the thermostat isn’t sending the cooling control signal to a condenser if it won’t turn on.
- Additionally, check the oil level, safety switches, and refrigerant pressure. The low-pressure safeguard may have been switched if the refrigerant is leaking.
Hot Air Is Being Blown By Your Air Conditioner
There might be several reasons behind this. You may test for each of them and take the following actions to remedy them:
- If the thermostat is the source of the issue, adjust it or replace it (digital thermostats tend to be a better option in this situation)
- Check the unit’s air filter and replace it if necessary; the location of the filter will vary on the type of air conditioner. Dirty filters hinder airflow, so do this.
- If the air conditioner’s evaporator or condenser is blocked, turn off the power and carefully brush off any debris before physically cleaning the more accessible parts.
- Condenser coils and fins may be cleaned by gently misting them with clean water. Annual expert maintenance is necessary to prevent coil damage, so be sure to check the refrigerant level as you might need to top it off.
Getting Professional Help
For an air conditioner to operate successfully and efficiently throughout its useful life, frequent maintenance is required for the unit’s filters, coils, and fins. When proper maintenance is neglected, the performance of the air conditioner will gradually deteriorate while energy consumption will gradually rise.
For more information on how to increase your comfort and the effectiveness of your air conditioner, check out AC repair services available in Granbury, TX to get access to industry-leading equipment, professionals, and facilities.